ZOOM TELEPHONICS, INC. 56K INTERNAL V.34 Card Type Modem, Fax Chip Set Unidentified I/O Options Line in(RJ-11), line out (RJ-11) Maximum Modem Rate 56.0Kbps Maximum Fax Rate 14.4Kbps Data Modulation Protocol Bell 103A/212A, ITU-T V.21, V.22, V.22bis,V.23, V.32, V.32bis, V.34 Fax Modulation Protocol V.17, V.21, CH2, V.27ter, V.29, V.33 Error Correction/Compression MNP5, MNP10, V.42, V.42bis Fax Class Class I & II Data Bus 8-bit ISA [Image] CONNECTIONS Function Label Function Label Line out CN1 Line in CN2 USER CONFIGURABLE SETTINGS Setting Label Position Plug and play enabled J2 Pins 2 & 3 closed Plug and play disabled J2 Pins 1 & 2 closed SERIAL PORT ADDRESS Setting J3 COM1 (3F8h) Pins 3 & 5, 4 & 6 closed COM2 (2F8h) Pins 1 & 3, 4 & 6 closed COM3 (3E8h) Pins 3& 5, 2 & 4 closed COM4 (2E8h) Pins 1 & 3, 2 & 4 closed INTERRUPT Setting J1/A J1/B J1/C J1/D IR/FONT> Open Open Pins 1 & 2 Open IRQ3 Open Pins 1 & 2 Open Open IRQ4 Open Open Open Pins 3 & 4 IRQ5 Open Open Open Pins 1 & 2 IRQ10 Open Pins 3 & 4 Open Open IRQ12 Open Open Pins 3 & 4 Open IRQ15 Pins 3 & 4 Open Open Open Disabled Pins 1 & 2 Open Open Open Note: Pins designated are in the closed position SUPPORTED COMMAND SET Basic AT Commands AT, A/ A, B, E, H, M, O, P, Q, T, V, W, X, Y, Z &C, &T, &W, &Y, &Z Extended AT Commands %C, %L, %Q \A, \B, \G, \L, \N -K, -Q :E +MS S Registers S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, S14, S16, S18, S21, S22, S23, S24 S25, S26, S27, S28, S29, S31, S32, S33, S38, S40, S41 Note: See MHI Help File for full command documentation. For a full command summary, see ZOOM TELEPHONICS, INC. 56K EXTERNAL V.34.